The manual wheelchair is a practical mobility aid designed specifically for those with limited mobility. It is crafted with high-quality materials to ensure durability and stability. The frame is lightweight yet sturdy, allowing for easy maneuverability.
The wheels are designed to roll smoothly on various surfaces, enabling users to move freely and independently. The seat is comfortable and provides good support, ensuring a pleasant experience during use.
Selling Point: Light weight, easy to be folded. Customization is acceptable, and sample orders are welcomed.
How to Measure a Wheelchair:
Seat Depth
Measure from the most posterior point of the body to the inside of the knee when in the seated position, and then subtract approximately 5 cm. This gap can be increased to give more leg overhang if more room is needed for a hand to lift the leg.
Measure from the most posterior point of the body to the inside of the knee when in the seated position, and then subtract approximately 5 cm. This gap can be increased to give more leg overhang if more room is needed for a hand to lift the leg.
Back Height
This is the distance from the seat base to the top of the wheelchair back. This will depend on how much upper back support is required. This will affect the freedom for the upper body to rotate.
This is the distance from the seat base to the top of the wheelchair back. This will depend on how much upper back support is required. This will affect the freedom for the upper body to rotate.
Front Seat to Floor
Measure the leg from the back of the knee to the sole of the foot. Then subtract the thickness of the cushion when it is compressed. Then add 6 to 8 cm for clearance between the footrest and the floor. If the wheelchair is to be foot-propelled, do not add the 6 to 8 cm.
Measure the leg from the back of the knee to the sole of the foot. Then subtract the thickness of the cushion when it is compressed. Then add 6 to 8 cm for clearance between the footrest and the floor. If the wheelchair is to be foot-propelled, do not add the 6 to 8 cm.
Rear Seat to Floor
This is the measurement from the ground to the rear seat edge. Relative to the front seat-to-floor dimension, this determines the rearward slope of the wheelchair seat.
This is the measurement from the ground to the rear seat edge. Relative to the front seat-to-floor dimension, this determines the rearward slope of the wheelchair seat.
Seat Width
The wheelchair user should be measured at the widest point between the knee and hip, plus 2 to 3 cm to allow sufficient room to move. Consideration must be given to the type of clothing likely to be worn.
The wheelchair user should be measured at the widest point between the knee and hip, plus 2 to 3 cm to allow sufficient room to move. Consideration must be given to the type of clothing likely to be worn.
Updated on June 17th, 2024
